DKSH.com.au Suppliers Contact

Stuart Aquatron Water Still, 4 litres/hour single distilled water

Code: A4000

  • Description
  • Specs

  • Fully automatic operation

  • High purity pyrogen free output

  • Low temperature distillate

  • Operates from any raw water supply

  • Reservoir level control

  • Simple conversion to pre-treated feed

  • Supplied with wall mounting bracket

  • Safety features allow unattended operation

  • Simple to clean

 

A4000
Produces 4 litres/hour single distilled water. Can operate standing on the laboratory bench or be wall mounted. Supplied with easy to fit wall mounting bracket.

The high quality PYREX® borosilicate glassware coupled with silica sheathed heaters gives pyrogen free distillate of the highest purity from virtually any raw water supply.

The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. This produces cold distilled water ready for immediate use and pre-heats the boiler feed to increase efficiency.

All glass construction allows rapid descaling using strong mineral acids. A built in "clean" function and integral acid addition funnel make the cleaning operation simple and safe with no need to dismantle any of the glassware. A large bore ROTAFLO® stopcock with PTFE key is fitted for easy draining of chemicals after cleaning. 

A flow sensing device will detect any reduction in the flow of cooling water to below the required level and will turn off the still before it can overheat. Sensing the flow of cooling water rather than its pressure is safer and allows the still to run normally on low pressure supplies down to 3psi (20kPa). As a fail-safe device there is an over-temperature thermostat mounted in the boiling chamber.

The Aquatron is very easy and safe to assemble and maintain. Both the acrylic safety screen and the cabinet lid are removable giving unrivalled access to the glassware components. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage.
Every Aquatron® water still is supplied with a reservoir level control.

The control is a simple and effective system which can be fitted to virtually any type of reservoir vessel. It will turn the still off when the reservoir is full and restart it when the level in the reservoir drops as distilled water is removed for use making it fully automatic. water purification.

 

A4000

A8000

A4000D

Output, l/hr

4, single

8, single

4, double

pH

5.0 - 6.5

5.0 - 6.5

5.0 - 6.5

Conductivity, µScm-1

1.0 - 2.0

1.0 - 2.0

1.0 - 1.5

Resistivity, mOhm-cm

0.5 - 1.0

0.5 - 1.0

0.7 - 1.0

Temperature, °C

25 - 35

25 - 35

25 - 35

Pyrogen content*

Pyrogen free

Pyrogen free

Pyrogen free

Water supply

1 l/min, 3-100psi, (20-700kPa)

1 l/min, 3-100psi, (20-700kPa)

1 l/min, 3-100psi, (20-700kPa)

Electrical supply

220 or 240V, 50-60Hz, single phase

220 or 240V, 50-60Hz, single phase

220 or 240V, 50-60Hz, single phase

Max. power, kW

3

6

6

Dimensions (wxdxh), mm

550x240x410

550x240x410

550x410x410

 
Contact us
  • DKSH Australia Pty. Ltd.
  • 1 Beyer Road
  • Braeside VIC 3195
  • Australia

Shop online safely and securely

Visa and Mastercard accepted