Stadler Ballistic STT 5000 for 2D and 3D separation

Effective sorting of the material stream begins with the ballistic separator

Sorting into different fractions:

• Rolling and heavy materials, e.g. hollow bodies, plastic bottles, stones, wood, cans and steel sections

• Flat and light materials, e.g. films, textiles, paper, cardboard boxes and fibrous products

• Screened fraction – various grit sizes can be separated according to paddle perforation

• Optimal distribution to NIR (near-infrared) acceleration belt directly downstream

• Early removal of any glass

• Adhesions on materials are shaken off

If you require additional information, please do not hesitate to contact the Environmental Technology Solutions team.

Application: 

Classification of difficult, sticky or wet materials with separation cuts from approx. 0.2 mm to 120 mm.

Material:

All types of recycling materials such as Non-hazardous Industrial Waste (Shredded or Unshredded) Bulky waste, Demolition waste, Domestic waste with organic separation

Advantages:

• Nearly blockage-free screening in the upper and lower deck thanks to tried and tested 3D and Flip-Flow technology.

• The 3D screening segments guarantee correct grain size with no long pieces or extraneous material for the tension shaft screen on the lower deck.

• The Flip-Flow screen with screwless mounted screen mats avoids unnecessary cleaning.

• This combination of 2 system solutions in 1 machine enables you to make enormous savings on conveying equipment, steel structures and space.