DKSH.com.au Suppliers Contact

Techne Dri-Block® heater. Ambient + 5°C to 200°C, 3 blocks (230V)

Code: DB200/3

  • Description
  • Specs

Introduction
Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years. Now Techne® are proud to introduce the new 2014 range offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general heating and incubating applications as well as sensitive analytical procedures particularly suited to microbiology and clinical laboratories. They are designed for precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. Techne® Dri-Block® heaters cover the temperature range from ambient +5°C to 100°C or 200°C (depending on model) using machined aluminium alloy Dri-Block® inserts as the heat transfer medium. Independent indicator lights indicate mains power and heater action.

Key Features
• Small, light, compact footprint - flat top surface allows units to be stacked in storage.
• Can hold any combination of aluminium insert blocks, depending on the model chosen.
• Digital models enable highly accurate temperature precision.
• Temperature range from ambient + 5°C to 200°C depending on the model chosen.
• Fast heat-up rate: 25°C to 100°C in 7-9 minutes, depending on the model chosen.
• Advanced temperature control. Temperature stability at 37°C ± 0.1°C.
• Outer casing is cool to the touch, even at maximum operating temperature.
• Bright orange 5-digit LED digital display for fast and accurate setting of temperature and timer.
• Temperature range from ambient to 100°C or 200°C, depending on the model chosen.
• Accurate, reproducible, rapid and safe heating of your samples.
• High quality, precision-engineered blocks provide excellent thermal contact.
• Choice of models with 2, 3 or 4 interchangeable blocks.
• Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.
• Full range of models and options for basic and advanced applications.

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations and are CE marked.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are manufactured in the UK and supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Larger three and four-block models are available for high throughput applications such as Chemical Oxygen Demand. The innovative Techne® range also includes a twin control unit, accommodating two blocks with independent digital temperature controls. Each block can be set to different temperatures - ideal for multiple users or for applications where samples have to be transferred between two temperatures very quickly.

Countdown Timer
Each digital unit features a countdown timer, which can be adjusted to time your experiment from anywhere between 1 minute and 100 hours, in 1 minute increments. To set the timer, press and hold the timer button and press the up or down buttons. Each press of the up or down buttons will increase or decrease the set time by 1 minute. If the buttons are held down, the time change will accelerate to 200 min per second. Release the timer button to activate the timer. An audible beep will indicate the timer is active. When the count-down has completed, an audible beep will be heard and the display will alternate between END and current temperature. Press the set/reset button to cancel the beeper. The unit will cool to ambient once the count-down time has completed. To cancel the timer, press and hold the set/reset button until STOP appears and an audible beep is heard.

Over-temperature cut-out
In the event of a fault occurring allowing the Dri-Block® heater to overheat, a thermal fuse will cut in and remove power from the heater when the temperature reaches approximately 192°C in DB100 models and 240°C in DB200 models - eliminating any risk.

Accurate temperature control
Highly accurate digital temperature control is made quick and easy with a bright 5-digit orange LED display. Each unit has a set point resolution of 0.1°C with temperature range from ambient + 5°C up to 100°C or 200°C depending on the model chosen. The Techne® Dri-Block® heaters facilitate a fast heat-up rate from 25°C to 100°C in 7-9 minutes, depending on the model chosen and all models are able to achieve a temperature stability at 37°C ± 0.1°C.

New panel venting
Each Techne® digital Dri-Block® has venting to the side panels. Whilst helping to create a fresh modern look, the vents are designed to dissipate heat from the outer surfaces of the Dri-Block®, allowing users to safely handle and relocate their Dri-Blocks® even after extended use at 100˚C or 200˚C.

Model DB100 / 4 DB100 / 3 DB100 / 2 DB100 / 2TC DB200 / 2 DB200 / 3
Blocks 4 3 2 2 2 3
Display 5 character LED 5 character LED 5 character LED 5 character LED 5 character LED 5 character LED
Working range Ambient +5°C to 100°C Ambient +5°C to 100°C Ambient +5°C to 100°C Ambient +5°C to 100°C Ambient +5°C to 200°C Ambient +5°C to 200°C
Minimum set temperature 0°C 0°C 0°C 0°C 0°C 0°C
Resolution 0.1°C 0.1°C 0.1°C 0.1°C 0.1°C 0.1°C
Accuracy (37°C) < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C
Accuracy (100°C) < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C
Stability (37°C) < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C < ±1°C
Stability (100°C) < ±0.15°C < ±0.15°C < ±0.15°C < ±0.15°C < ±0.15°C < ±0.15°C
Max variation within block (37°C) < 0.2°C < 0.2°C < 0.2°C < 0.2°C < 0.2°C < 0.2°C
Max variation within block (100°C) < 0.25°C < 0.25°C < 0.25°C < 0.25°C < 0.25°C < 0.25°C
Max variation between blocks (37°C) < 0.5°C < 0.5°C < 0.5°C < 0.5°C < 0.5°C < 0.5°C
Max variation between blocks (100°C) < 1.0°C < 1.0°C < 1.0°C < 1.0°C < 1.5°C < 1.5°C
Heat up time 25-100°C (min) 7 7 8 8 8 9
Heat up time 25-200°C (min) na na na na 23 19
Audible alarm Yes Yes Yes Yes Yes Yes
Minimum timer 1min 1min 1min 1min 1min 1min
Maximum timer 99hr 59min 99hr 59min 99hr 59min 99hr 59min 99hr 59min 99hr 59min
Safety cutout device Thermal fuse Thermal fuse Thermal fuse Thermal fuse Thermal fuse Thermal fuse
Dimensions (WDH) 356 x 260 x 105mm 279 x 260 x 105mm 202 x 260 x 105mm 279 x 260 x 105mm 202 x 260 x 105mm 279 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz
Power (W) 600 450 300 300 300 450
Shipping weight (Kg) 7 6 5 5 5 6
Warranty (Years) 3 3 3 3 3 3
 
Contact us
  • DKSH Australia Pty. Ltd.
  • 1 Beyer Road
  • Braeside VIC 3195
  • Australia

Shop online safely and securely

Visa and Mastercard accepted